How to prevent discoloration of PE tarpaulin


For those white cloths that are not properly maintained […]

For those white cloths that are not properly maintained after cleaning, discoloration will occur. In fact, when using PE tarpaulins, try to avoid contact between tarpaulins and carbon ink and other difficult-to-clean items. After cleaning, apply toothpaste or use White chalk powder is evenly applied and dried to prevent discoloration. This method can also use another white paper to dry your tears on the tarpaulin after it is dried. It can also prevent discoloration. We should also pay attention to the discoloration of PE tarpaulins. Only then can we guarantee that PE tarpaulin is more durable. Hope everyone can pay attention.

First of all, tarpaulin glue is generally used to repair holes and small-area tear tarpaulins. In the past, wax thread knitting was used for repair, which was not only costly but also slow. Now with adhesives, tarpaulin repair is much simpler. The specific method is as follows. Of course, if it is a leak-type damage, two pieces can be cut out in advance. For loophole repair fabrics, it is best to round the corners when cutting. First make up the outside of the tarpaulin, and the fabric that is pasted is preferably uncoated, which is more wear-resistant. Apply the glue evenly, especially around the edges, and then apply it. If you don't worry about it, you can apply it again at the seams. Then repair the other side in the same way. In addition to the above methods, we can also borrow the method of repairing tires. Use a file to rub the cut tarpaulin about 2cm near the edge to make it easier for the tarpaulin. Glue sticks together better.

Since the tarpaulin is a tool for sheltering from wind and rain, it will have a moldy smell over time. Friends who use tarpaulins should know that when it rains, we take out the tarpaulin. When the rain stops, we put the tarpaulin back. The cloth is put away, so that there will be more tarpaulin, and the moldy smell of tarpaulin will appear. When removing it, we need to know the cause of its musty smell. The mold will grow in a humid environment and multiply. Then, in order to prevent it from growing in a humid environment, we can support it and wipe it off with warm soapy water and a sponge. Let the sponge stick with hot water and cleaning agent to wipe the tent slowly. The most obvious way to remove mold is to mix a glass of brine, a glass of lemon juice, and a glass of gallon water, and knead the mixed solution together to the mildew point. Medium, after drying it will have unexpected results.